Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Inspection for Goodyear Homeowners
A chimney inspection in Goodyear answers one question: is this flue safe to use? Wood smoke, dust, and the fine desert grit that settles on roofs around Goodyear all leave deposits inside a flue, and the only way to know what’s built up or broken is to look with the right tools. Our technicians have up to 8 years of experience and inspect with a camera, not a flashlight and a guess. Most jobs can be booked the same day. Call (866) 361-8426 and we’ll set up a time and give you a straight answer on what we find.
Fireplace Inspection
Fireplace Inspection is the close-up look at the firebox, damper, smoke chamber, and the first few feet of flue above the fire, and it’s the right service when you’ve just moved into a home in Goodyear with a fireplace you’ve never used, or when you notice the fire isn’t drafting the way it used to. It’s also what we recommend before the first burn of the season, before you list a home, or after any chimney fire. We check the firebox for cracked brick and loose mortar, test the damper for a tight seal, look at the smoke shelf for rubble and soot, and photograph anything that concerns us so you can see it yourself. A fireplace inspection in Goodyear typically runs $90 to $175 depending on how accessible the firebox is and whether we’re already on-site for a sweep. The written estimate sets the final price before any work begins.
What We Check Inside the Firebox
Cracked firebrick, failed mortar joints, and a warped or rusted damper are the three most common fireplace problems we find. Each one changes how the fire burns and how much heat escapes up the flue instead of into the room. We photograph every issue and note whether it can wait or needs attention before your next fire.
When a Fireplace Check Makes Sense
New ownership, a long idle stretch, or a change in how the fire draws are the usual triggers. If you’ve never used the fireplace in your Goodyear home, start here. It’s the cheapest way to know what you’re working with before you light a fire.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Inspection Services
Chimney Inspection Services cover the whole flue from the firebox to the cap, inside and out, and they’re what we recommend every year for anyone who burns wood regularly. Around Goodyear, the burn season is short and intense – a few cold weeks where the fireplace runs every evening – and that concentrated use can pack creosote fast. We inspect the flue interior with a camera, check the crown and cap from the roof, look at the flashing where the chimney meets the roofline, and assess the exterior masonry for cracks and spalling. Chimney inspection services in Goodyear typically cost between $125 and $300 depending on whether we’re doing an annual check or a more detailed level 2 look. We name the problem and the fix in writing, and we tell you plainly when something can safely wait.
Annual Checks vs. Problem Calls
An annual check is preventive – it catches small issues before they become repair bills. A problem call is reactive: something smells, smokes, or leaks. We handle both, but the annual check almost always costs less than the repair it prevents.
What the Written Report Includes
Every inspection comes with photos of anything we flag and a plain-language summary of condition and recommended next steps. You’ll see what we saw. If it looks fine, we’ll tell you it looks fine.
Chimney Flue Inspection
Chimney Flue Inspection focuses on the liner itself – the clay tile, metal, or cast-in-place flue that carries smoke and gases up and out. It’s the part most homeowners can’t see and most need to know about, because a cracked or missing liner is the single biggest predictor of a chimney fire or carbon monoxide problem. It’s the right service when you’ve had repeated chimney fires, when your flue has visible damage from the roof, when you’re switching fuel types, or when a previous inspection flagged a concern. We run a camera the full length of the flue and check every joint, offset, and transition. We know where a Gelco or Olympia Chimney liner tends to wear and what a proper installation should look like. A chimney flue inspection in Goodyear typically costs $150 to $325 depending on flue length and interior condition.
What the Camera Sees That the Eye Can’t
Hairline cracks in clay tile, gaps at mortar joints, and separated liner sections don’t show up from the firebox. The camera reveals them at full resolution and we record the footage so you can review. Catching a hairline crack now is the difference between a HeatShield resurfacing and a full reline later.
When a Flue Inspection Is Urgent
Repeated fires that are hard to start, smoke backing into the room, or a strong creosote smell on warm days are all reasons to inspect the flue soon. None of these mean the chimney is dangerous right now. They do mean it needs a look before you burn again.
Chimney Fire
Chimney Fire damage is what we find more often than homeowners expect, because many chimney fires in Goodyear smolder quietly in a flue packed with creosote and never break through the roof. If you’ve had a loud roaring fire you might already know. If you’ve had a slow, hot, crackling burn that felt different, you may not. The signs – puffy creosote that looks like honeycomb, warped damper, discolored cap, cracked tile – all show up on inspection. We inspect for fire damage, remove any remaining creosote with the appropriate method, and tell you whether the flue needs HeatShield resurfacing or replacement. Post-fire inspection in Goodyear typically runs $175 to $375 depending on the extent of damage and whether the flue needs cleaning first. We don’t charge to tell you the flue is fine.
The Signs You Might Have Missed
Puffy, honeycomb-textured creosote, a warped damper, a discolored or pitted cap, and smoke stains around the firebox are the classic post-fire signs. Any one of these means the chimney needs an inspection before the next fire. None of them mean you have to stop using your fireplace today.
What Happens After a Chimney Fire
We inspect, document, and then recommend repair only when the evidence supports it. HeatShield can often restore a damaged flue that doesn’t yet need full replacement. When it does need replacement, we use DuraFlex flexible liner systems that handle bends and offsets older masonry often has.
Level 2 Chimney Inspection
Level 2 Chimney Inspection is the deeper inspection recommended after a chimney fire, after an earthquake, when you’ve changed fuel type, when you’re buying or selling a home, or when a level 1 inspection finds something that needs closer attention. It covers everything a level 1 does plus a full video scan of the flue and closer inspection of accessible attic, crawlspace, and roof-level areas. This is the inspection real estate transactions usually call for, and it’s the one that gives you the most complete picture of chimney condition. A level 2 chimney inspection in Goodyear typically runs $225 to $425 or more depending on roof access, flue configuration, and whether attic or crawlspace areas need to be opened up. The written estimate we give you before the inspection sets the final price.
When Level 2 Is Required
Buying or selling a home, changing from wood to gas or vice versa, and any past chimney fire are the situations that call for level 2. So is a level 1 finding something that needs a closer look. In those cases, the extra depth is worth the additional cost.
What Makes It Different From Level 1
Level 1 is a visual inspection of accessible areas. Level 2 adds the full-length video scan and access to attic, crawlspace, and roof-level areas. That’s where hidden problems live – a cracked tile joint, a separated liner, a crown that’s failed and let water in.
Chimney Leak
Chimney Leak problems in Goodyear almost always trace back to water getting in where it shouldn’t – a cracked crown, failed flashing where the chimney meets the roof, a missing or rusted cap, or deteriorated mortar joints on the exterior. The desert doesn’t get much rain, but when it does, a leaking chimney can soak insulation, stain ceilings, and start rusting the firebox and damper. If you see water stains on the ceiling near the chimney, rust inside the firebox, or a musty smell after a storm, it needs a look. We inspect the crown, cap, flashing, and masonry, identify the entry point, and recommend the fix – re-crowning, re-flashing, a new cap, or masonry repair. Chimney leak diagnosis in Goodyear typically costs $125 to $275 depending on how hard the entry point is to locate. We don’t recommend re-crowning or masonry work without showing you where the water is coming in.
Tracing the Entry Point
A leak doesn’t always come in where the stain appears. Water can travel sideways through masonry, so the stain on your ceiling might be two feet from the actual entry. The camera and a close roof-level inspection find the source so we can fix the right thing.
Prevention Before Monsoon Season
The best time to check for leaks is before the summer storms, not after. A cracked crown and failed flashing are easy to spot when they’re dry. Once they’ve soaked the masonry, the problem spreads. An inspection in late spring catches them early.
Chimney Camera Inspection
Chimney Camera Inspection is the full-length video scan of your flue that lets us see every joint, offset, and liner condition without any guesswork. It’s the tool that turns “we think the liner is fine” into “we can show you it’s fine.” We run a high-resolution camera the entire length of the flue, record the footage, and review it with you. It’s part of every level 2 inspection and any inspection where we suspect a liner problem. A chimney camera inspection in Goodyear typically runs $100 to $225 as a standalone service or is included in level 2 pricing. The footage is yours to keep, and any recommendation we make is tied to something you can see on the video yourself.
What the Footage Reveals
Hairline tile cracks, mortar gaps, separated liner sections, and creosote glazing all show up clearly on the recording. So does the flue’s interior shape – important for deciding between HeatShield resurfacing and a DuraFlex liner replacement. We review the footage with you and point at what we’re seeing.
Why You See It Too
You shouldn’t have to take our word for it when someone recommends a repair. The recorded footage makes the diagnosis visible and gives you a reference point if you want a second opinion. That’s the standard we hold ourselves to.
Brands We Service
We work with professional-grade brands because the material behind the repair matters as much as the repair itself. HeatShield is a proprietary flue resurfacing system that restores a deteriorating clay liner without full replacement – it’s a specific modern option many chimney services can’t offer. DuraFlex flexible liner systems are what we use when a flue has bends or offsets that a rigid liner can’t follow, common in older masonry. Olympia Chimney and Gelco products show up in our cap, damper, and ventilation work where quality gets overlooked.
We also work with Famco and Copperfield product lines for the parts that keep a chimney functioning the way it should. Whether your chimney has Olympia Chimney components or any other make, we can help. The point isn’t the brand name – it’s that the parts last and we know where each one tends to wear out.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Smoke backing into the room. If smoke comes back down when you burn, the draft is compromised – usually from a blocked flue, a failed damper, or a flue restriction. It’s not a fire you want to push through.
- A strong creosote smell in warm weather. Creosote that’s glazed or puffy is a chimney fire waiting to happen. The smell on a hot day is the flue telling you it needs a look before the next burn season.
- Water stains or rust near the firebox. Both point to a chimney leak that’s likely coming from the crown, flashing, or cap. Water in the flue accelerates damage quickly, so it’s worth a call.
- A roaring sound or popping during a fire. That’s how a small chimney fire sounds. If you’ve heard it and the flue hasn’t been inspected since, it needs one now, not at the start of next season.
- Visible cracks in the firebox or exterior masonry. Cracks in either place can mean the liner has shifted or water has gotten in. Both are fixable, but neither improves with time.
Our Process, Step by Step
- 1
Book the inspection. Call (866) 361-8426 and tell us what you’re seeing. We’ll ask a few questions to match the inspection level to the problem, and we’ll set a time. We answer 24/7, and dispatch runs from 7am to 7pm, Sunday through Friday.
- 2
Scan the flue with a camera. Every inspection includes a full-length video scan unless you specifically ask for level 1. We see every joint and record the footage so you can review it.
- 3
Inspect the fireplace, crown, cap, flashing, and exterior. The camera catches the inside; this step catches the outside. Where the chimney meets the roof is where most leaks start, so we look closely there.
- 4
Review the findings with you, footage in hand. We point out what we found, what it means, and what the options are. If a repair can wait, we say so.
- 5
Leave you with a written report and estimate. Anything you want done gets priced per job in writing before we schedule it. The estimate is free and there’s no obligation.
How Much Does Chimney Inspection Cost in Goodyear?
Chimney inspection in Goodyear typically runs $90 to $425 depending on the level of inspection and what we’re diagnosing. A basic visual fireplace inspection for a single fireplace usually lands in the $90 to $175 range. A standard chimney inspection covering the full flue and exterior runs $125 to $300. A level 2 inspection with a full-length camera scan runs $225 to $425 or more depending on roof access and whether attic or crawlspace areas need to be opened. Chimney leak diagnosis is typically $125 to $275, and a standalone camera inspection is $100 to $225.
What affects the price: accessibility of the roof, the number of flues in the chimney, whether the inspection is part of a real estate transaction, and how much diagnostic work a specific problem requires. Height and chimney configuration matter too – a single-story flue with a straight run is quicker to inspect than a multi-flue masonry chimney with offsets.
How to avoid overpaying: get the level of inspection you actually need, not the most expensive one. A level 1 visual inspection is enough for a routine annual check on a well-maintained flue. Level 2 is for the specific situations that call for it – after a fire, when buying a home, or when a level 1 finds something. We’ll tell you which is right for your situation before we book. Also avoid services that charge for the estimate. Ours is free, and if the inspection shows no problem, we’ll tell you that too.
What’s included in a free estimate: a written price per job before any work is scheduled, camera footage you can review for any level 2 inspection, and a clear recommendation with the evidence behind it. Repairs are quoted separately and only when we can show you what’s wrong.
Our Service Area Near Goodyear
We serve homeowners in Goodyear and the surrounding West Valley. From Avondale and Buckeye to Glendale, Sun City, Maricopa Colony, Gila Crossing, Ak-Chin Village, and Stanfield, we schedule inspections with the same technician team, the same camera equipment, and the same written report. Response times depend on our schedule that week; most inspections can be booked within a few days, and many can be scheduled same-day. More on our Goodyear service area is available if you’re outside the city limits and want to know if we cover your street.
Serving Goodyear, AZ – Our Local Coverage Area
We serve Goodyear and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Chimney Inspection in Goodyear
A chimney inspection is a professional assessment of your chimney’s condition – from the firebox and damper up through the full flue to the crown and cap. It’s how you find out whether the flue is safe to use, what’s built up inside it, and whether any part of the structure is damaged. We use a camera for the flue and a visual check for the exterior. Call (866) 361-8426 for an exact quote – estimates are free.
Most chimney inspections take 45 minutes to an hour and a half depending on the level. A basic fireplace inspection is usually under an hour. A level 2 with a full camera scan and roof access takes longer, closer to 90 minutes. We don’t rush the camera work because that’s where the real findings come from. Call (866) 361-8426 to book a time that works for you.
Chimney inspection in Goodyear typically runs $90 to $425 depending on level and diagnosis. A basic fireplace inspection is $90 to $175, a standard full inspection is $125 to $300, and a level 2 with camera and attic access runs $225 to $425 or more. Leak diagnosis is $125 to $275. The written estimate sets the final price before we schedule. Call (866) 361-8426 – estimates are free.
Yes. We work with Olympia Chimney, Gelco, and Famco components, along with HeatShield and DuraFlex systems. Whether your chimney has Olympia Chimney parts or any other make, we can inspect and repair it. The brands we carry into a job are the ones that hold up in this climate. Call (866) 361-8426 to talk through what you have.
Yes, same-day inspections are often available when you call before the day is booked. We answer 24/7 and dispatch runs from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. Call (866) 361-8426 and we’ll set the earliest available time.
Any repair we recommend gets quoted per job with the terms in writing before we start. We don’t claim a warranty number we can’t back up. What we do stand behind is the diagnosis – if we recommend a repair, it’s because we can show you the evidence on the camera footage or in photos. Call (866) 361-8426 to ask about specific repair terms.
Clear access to the fireplace and hearth, and make sure the damper is easy to reach. If you have furniture or decor near the firebox, move it back so we have a workable area. Make sure we can get to the roof – if there’s a gate code or a dog in the yard, let us know when you book. That’s all most inspections need. Call (866) 361-8426 to schedule.
Schedule Your Chimney Inspection Service in Goodyear Today
A chimney inspection is the cheapest, fastest way to know whether your fireplace is safe to use this season. We scan the flue, check the exterior, hand you a written report with footage you can review, and recommend repairs only when the evidence supports it. Call (866) 361-8426. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. The estimate is free and there’s no obligation. When you want the full picture on your chimney from start to finish, Goodyear Chimney Sweep is the one team that inspects, cleans, and repairs it.
Written by the team at Goodyear Chimney Sweep.